6
HOW TO CLEAN
Cleaners: Never use harsh, abrasive cleaners, heavy-duty cleaners, or solvents on any surface.
Exterior: Wipe with damp, sudsy cloth, rinse and dry. For stubborn stains and for periodic
waxing, use silicon wax.
Freezer: When refrigerator needs defrosting turn thermostat to “OFF” (“0”). Do not use sharp
instruments to scrap off ice/frost.
Refrigeration Section: Wash shelves and other removable parts in warm sudsy water, rinse and
dry. Wash interior with baking soda solution (3 tablespoons to I liter of water) or warm
sudsy water, rinse and dry.
Magnetic Door Seals: Wash with warm sudsy water.
The Finishing Touch: Replace all parts and return thermostat dial to desired setting.
HOW TO INSTALL
z Install refrigerator in a convenient location
away from extreme heat and cold. Allow
sufficient clearance between the
refrigerator and side wall so the door will
open without obstruction. Refrigerator is
not designed for recessed installation.
z
Select a space with strong level floor.
z Allow 5 inches of space between the
refrigerator’s side and the wall.
z
The appliance must be correctly
connected to the power supply.
z Do not use an extension cord.
POWER CORD REPLACEMENT
If the refrigerator’s power cord is damaged, have it replaced by a qualified repair agent.
To Next Page
Loading...
Need help?
General
