Magic Chef MCC1010STG User Manual

11
HOW TO SET THE OVEN CONTROLS
HOW TO SET THE OVEN CONTROLSHOW TO SET THE OVEN CONTROLS
HOW TO SET THE OVEN CONTROLS
BEEPS DURING OVEN SETTINGS
♦ ONE BEEP: Oven accepts the entry.
♦ TWO BEEPS: Oven does not accept the entry. Please check and try again.
SETTING THE CLOCK
When the oven is first plugged in, the display will briefly show “ENTER”, “CLOCK”,
“TIME”, you can set the clock time now or later. To set the clock time later,
1. Press CLOCK pad.
2. Use the numeric pads (in the
natural sequence of time) to enter
clock time
3. Press CLOCK to confirm.
The display stops blinking, and the
colon starts blinking. This digital clock
allows you to set from 1:00 to 12:59.
MICROWAVE COOKING
1. Press MW
POWER pad.
(Select the desired power level.)
2. Press number pads to enter cooking
time until the correct cooking time is
displayed.
3. Press START pad.
The “MICRO” indicator lights and “P-H1”
is displayed
The display will show entered power
level.
The display will show entered cooking
time.
Microwave cooking allows you to customize cooking power and time. First, you select a
power level by pressing the MW POWER pad a number of times (see the table below).
CLOCK
MW
POWER
NOTE:
The clock works in 12-hour
cycle.
NOTE:
If step 1 is omitted, the oven
will cook at full power.
NOTE:
You oven can be
programmed for 99
minutes 99 seconds.
(99:99)

Magic Chef MCC1010STG Specifications

General

Brand	Magic Chef
Model	MCC1010STG
Category	Microwave Oven
Language	English