17
OPERATION INSTRUCTIONS
CONTROL PANEL
Figure 17
a. Program: Press this button to select your desired washing program
Heavy (light) - Gentle (light) - Normal (light) - Quick (light) - Soak (light)
b. Digital display: The digital display will show and count down the estimated minutes for the wash cycle
selected.
c. Load Size: Press this button to set your washing load size. Your water level throughout all steps in the cycle.
d. Wash: Press the button to select the washing time.
e. Rinse: Press the button to select the times of rinse.
f. Spin: Press the button to select the time of spin.
g. Start/Pause: Press the Start/Pause button once to the start the wash cycle. Press the button during
operation to pause the cycle. Press again to continue the cycle.
h. On/Off: Press the button once to turn on the power of On/Off the washer. Press again to turn off the unit.
c
b
d e f g ha
WASHING LOAD OF LAUNDRY
Step 1: Power on your Washer
Press the On/Off button to power your wash on.
Step 2: Load your Washer
WARNING: Before loading your laundry, be sure to take out coins, keys and other hard objects, and close all
zippers to prevent the clothes from damage.
Sort laundry by fabric type, soil level, color and load size as needed. Refer to the Fabric Care Chart in the APPENDIX.
You can fill the tub with dry, unfolded clothes, but DO NOT OVERLOAD the tub. Load the tub no more than 3/4 full.
To ensure good cleaning results, DO NOT overload the tub, especially when washing heavily soiled loads. NEVER
load the tub more than 3/4 full.
WARNING: Overloading may reduce washing efficiency, cause excess wear, and possibly cause creasing or
wrinkling of items in the load.
NOTE: To add a forgotten item:
1. Press the Start/Pause button to pause the washer.
2. Wait for the tub to stop turning, then open the door.
3. Add the item, close the door, and then press the Start/Pause button. The cycle will resume.
To Next Page
Loading...
Need help?
General
