APPLIANCE FEATURES
Touch-screen Control Panel
• Touch-screen control panel is on the front of glass door for convenient temperature reading and
setting. You can easily read the zone temperature without opening the door and control your unit
just by touching the screen. For details of temperature setting, please see “Operating Your
Appliance”. (pg. 6-7)
Two Temperature Zones
• There are two zones in this appliance divided by a partition.
• Each zone has its independent temperature control and display.
• The upper zone can hold up to 16 bottles.
• The lower zone can hold up to 28 bottles.
Interior Light
• Each zone has its own interior light, which can be switched on or off by pressing the pad
(light)
on the control panel. Long-life and high efficiency LEDs are installed for durability and energy
efficiency.
Upper Zone
• There are two wine shelves of full depth in the upper zone. Each shelf can holds up to 8 bottles
with the bottle necks alternating front to back.
• The second supporting guide in the upper zone (counted from top, see illustration “A” on this
page) is not designed for wine shelves.
Lower Zone
• There are also two wine shelves of full depth in the lower zone. Each shelf can holds up to 8
bottles with the bottle necks alternating front to back.
• The bottom rack in the lower zone, which consists of two stories, each holds up to 6 bottles with
bottle necks facing the front (see illustration below on this page).
Engaged Wine Shelves
• All the wine shelves have tabs to engage the cabinet on both sides.
• Any of the shelves can be removed to accommodate larger bottles.
To Remove a Shelf:
• Remove all bottles from the shelves.
• Lift the shelve upwards and then gently pull out the shelves.
To Replace a Shelf:
• Place the sides of the shelves back onto the supporting guides of the cabinet and push back until
the shelf tabs slide into place.
NOTE: Ensure that the tabs are firmly engaged in place before storing any bottles.
EN
5
To Next Page
Loading...
Need help?
General
