4 6 720 607 090
1. User’s Operating Instructions
Pilot ignition:
1. Depress slide control and hold it in.
2. Press the
igniter repea-
tedly until the
pilot is alight.
3. Release the slide control approx 10
seconds after pilot lights.
4. Repeat these steps if the pilot does not remain alight.
Burner operation:
When the slide control is in the “burner” position the burner
will ignite when a hot tap is turned on.
Temperature regulation:
Turn left
to reduce
water
temperature
Turn right to
increase
water
temperature
Switching off:
Move slide control to the far left
Note: with higher temperatures the available flow of water
will be reduced.
Note: the pilot flame will extinguish
Note: if the appliance is to be left unused in an unheated
area during cold weather the gas and water supplies should
be isolated and the system drained.
Your installer will be able to advise you.
- Off
- Pilot
- Burner
- Igniter
To Next Page
Loading...
Need help?
General
