Mainstays MS61100016716 User Manual

7
• Once the ingredients have reached the
desired consistency, release the POWER/
PULSE Button to stop operation and
switch the appliance off.
• Disconnect the plug from the wall outlet
(ill.
i
).
• Rotate the Cup with Blade Unit
counterclockwise and remove it from the
Motor Unit.
i
• Turn the Cup with Blade Unit facing up. Unscrew the Blade Unit and remove it from the
Cup (ill.
j
).
• Pour the content of the Cup into a suitable container. Alternatively, place the Resealable
Lid onto the Cup to use it as a drinking Cup, for transportation and/or short-term
storage (ill.
k
).
• Allow the appliance to cool down completely before cleaning it
( Cleaning and Maintenance). Clean after every use.
j k
HINTS AND TIPS
• Add solid ingredients into the Cup rst before adding liquid ingredients to ensure an
even blend. Do not use with dry ingredients only.
• Cut ingredients into smaller pieces to allow quicker blending. For best results, cut solid
ingredients into approximately ½ inch pieces.
• Operate the appliance for only as long as needed to reach the right consistency. To stop
the operation, release the POWER/PULSE Button.
• Do not operate the appliance continuously for more than 1 minute. Do not operate the
appliance without load.
• Allow the appliance at least 3 minutes to cool down between operation cycles. Operate
the appliance for a maximum of 3 consecutive cycles, after which, allow the appliance
to cool down for at least 20 minutes before the next use. Do not exceed the maximum
operation cycles.
• Do not use the appliance to blend hot liquids or foods.
• After each use, it is recommended to clean all accessories used.
• Assemble the Blade Unit onto the Cup (ill.
e
). Ensure the Seal Ring is present and
undamaged. Ensure a tight and secure t. Do not overtighten.
• Turn the Cup with the Blade Unit facing down and place it onto the Motor Unit (ill.
f
).
Ensure the tabs on the Cup are aligned with the recesses on the Motor Unit.
• Push down on the Cup with Blade Unit and rotate clockwise until it locks in place (ill.
g
).
f
MAX
g
MAX
• Connect the plug into a wall outlet (ill.
h
).
NOTE:
- Do not blend dry ingredients.
- Do not use the appliance more than 1 minute for
each operation cycle. Allow the appliance to cool
down for at least 3 minutes between operation
cycles.
WARNING:
- Always ensure there is food in the Cup before
using the appliance.
- Do not use the Cup to blend hot liquids or foods.
h
MAX
- Do not overll the Cup to avoid spilling or food entering the Motor Unit.
- Do not use the appliance without the Cup and Blade Unit.
• Press the POWER/PULSE Button to start the operation.
NOTE:
- Press and hold the POWER/PULSE Button at any time to bring the motor to maximum
speed. Release the POWER/PULSE Button to stop the operation.
WARNING:
- Never attempt to remove the Cup from the Motor Unit during operation.
- Do not operate the appliance continuously for more than 1 minute. Do not operate
the appliance without load.
- Allow the appliance at least 3 minutes to cool down between operation cycles.
Operate the appliance for a maximum of 3 consecutive cycles, after which, allow the
appliance to cool down for at least 20 minutes before the next use. Do not exceed the
maximum operation cycles.
Blender_MS-160ZPSBLD_US_IM_V4_200507.indd 7 5/7/20 11:36 AM

Mainstays MS61100016716 Specifications

General

Brand	Mainstays
Model	MS61100016716
Category	Blender
Language	English