Makita 1911B User Manual

2
SPECIFICATIONS
• Manufacturer reserves the right to change specifications without notice.
• Specifications may differ from country to country.
GENERAL SAFETY RULES
USA002-2
(For All Tools)
WARNING:
Read and understand all instructions. Failure to follow all
instructions listed below, may result in electric shock, fire and/or
serious personal injury.
SAVE THESE INSTRUCTIONS
Work Area
1.
Keep your work area clean and well lit.
Cluttered benches and dark areas invite acci-
dents.
2.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust.
Power
tools create sparks which may ignite the dust
or fumes.
3.
Keep bystanders, children, and visitors
away while operating a power tool.
Dis-
tractions can cause you to lose control.
Electrical Safety
4.
Double insulated tools are equipped with
a polarized plug (one blade is wider than
the other.) This plug will fit in a polarized
outlet only one way. If the plug does not
fit fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified elec-
trician to install a polarized outlet. Do not
change the plug in any way.
Double insula-
tion eliminates the need for the three wire
grounded power cord and grounded power
supply system.
Model 1911B
Planing width 110 mm (4-3/8”)
Planing depth 2 mm (1/16”)
No load speed (RPM) 16,000/min.
Overall length 355 mm (14”)
Net weight 4.2 kg (9.3 lbs)

Makita 1911B Specifications

General

Input power	- W
Power source	AC
Idle speed	16000 RPM
Vibration level	3.5 m/s²
Planning width (max)	110 mm
Chip thickness (max)	2 mm
Dust extraction port	Yes

Weight and Dimensions

Depth	160 mm
Width	365 mm
Height	172 mm
Weight	4200 g