Makita 2106 User Manual

Installing or removing blade
CAUTION
:
Always be sure that the tool is switched off and unplugged before installing or removing
the blade.
Oil on the blade can cause the blade to slip or come off unexpectedly. Wipe off all ex-
cess oil with a cloth before installing the blade.
0 Use caution when handling the blades so that you are not cut by their sharp teeth
Turn the blade tightening lever clockwise
until
it hits against the protrusion on the
frame. Match the direction of the arrow
on the blade to that of the arrow on the
wheels.
Insert the blade between the bearings of
one blade guide first and then into the
other blade guide. The blade back should
contact the bearings in the lower portion
of the blade guides.
Blade tightening lever
v
Bearing , , Blade
r\-\ Blade guide I
6

Makita 2106 Specifications

General

Brand	Makita
Model	2106
Category	Saw
Language	English