8
Vacuum head set (Accessory)
1
005073
1
2
3
003258
Use the vacuum head for dust extraction. Install the
vacuum head on the tool base using the two screws.
Then connect a vacuum cleaner to the vacuum head.
005084
MAINTENANCE
CAUTION:
• Always be sure that the tool is switched off and
unplugged before attempting to perform inspection
or maintenance.
• Never use gasoline, benzine, thinner, alcohol or the
like. Discoloration, deformation or cracks may
result.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers, always
using Makita replacement parts.
ACCESSORIES
CAUTION:
• These accessories or attachments are
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
• Straight & groove forming bits
• Edge forming bits
• Laminate trimming bits
• Straight guide
• Templet guide 25
• Templet guides
• Templet guide adapter
• Lock nut
• Collet cone 3/8", 1/4"
• Collet cone 6 mm, 8 mm
• Wrench 8
• Wrench 13
• Wrench 22
• Vacuum head set
Router bits
Straight bit
005116
mm
DA L 1 L 2
6
1/4"
8 8 60 25
6
1/4"
6
1/4"
65018
85018
20 50 15
1/2"
12
1/2"
12
12 60 30
10 60 25
006452
1. Dust nozzle
2. Hose of vacuum
cleaner
3. Screws
1. Vacuum head
To Next Page
Loading...
Need help?
General
