Model No.
Description
PRODUCT
CONCEPT AND MAIN APPLICATIONS
P 1 / 6
Specification
Standard equipment
Optional accessories
Continuous Rating (W)
Voltage (V) Cycle (Hz)
Input Output
Max. Output (W)
120
No load speed: min.-1= rpm
Wheel size: mm (")
Clutch
Soft start
Socket wrench 17 ................................... 1 pc.
Model 4114
Diameter
Hole diameter
15 AC/ DC 1,650 800 3,000
Current (A)
Continuous Rating (W)
Voltage (V) Cycle (Hz)
Input Output
Max. Output (W)
110
Model 4114S
23 50 / 60 2,400 1,500 2,750
230 11 50 / 60 2,400*1 1,600 3,700
Current (A)
Dimensions: mm (")
Width (W)
Height (H)
Length (L)
673 (26-1/2)
240 (9-1/2)
329 (13)
Note: The standard equipment for the tool shown above may differ by country.
3,500
355 (14)
Yes
(SJS - Super Joint System)
No
25.4 (1)
Thickness 2.6 (1/8)
Specifications
Model
4114
Protection against electric shock
Double insulation
Cord length: m (ft) 2.5 (8.2)
Net weight*2: kg (lbs)
10.8 (23.8)
Yes
4114S
10.9 (24.0)
*2: Without wheel and cord
*1: Switzerland =2,300W, Brazil (127V)=1,900W
Assorted diamond wheels
Assorted abrasive cut off wheels
Base set
Elbow joint 32 (for connecting to vacuum cleaner)
Ring 20
4114, 4114S
Angle Cutter 355mm (14")
Model 4114S is the 355mm (14") version of the current
4112S 305mm (12") Angle cutter, having the following
same benefits as 4112S;
High torque delivered at low motor speed of 3,500rpm
"SJS - Super Joint System" that provides smooth
approach and long service life of gear section
Soft start to minimize startup shock
Model 4114 features the same benefits as 4112S except for
soft start function.
Model 4114 for North American countries feature AC/DC switch.
T
ECHNICAL INFORMATION
To Next Page
Need help?
General
