Makita 4351T User Manual

2
ENGLISH (Original instructions)
SPECIFICATIONS
Model 4351T 4351CT 4351FCT
Length of stroke 26 mm 26 mm 26 mm
Wood 135 mm 135 mm 135 mm
Steel 10 mm 10 mm 10 mm
Max. cutting capacities
Aluminum 20 mm 20 mm 20 mm
Strokes per minute (min
-1
) 2,800 800 - 2,800 800 - 2,800
Overall length 271 mm 271 mm 271 mm
Net weight 2.5 kg 2.5 kg 2.5 kg
Safety class /II
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
END201-7
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･ Read instruction manual.
･ DOUBLE INSULATION
･ Only for EU countries
Do not dispose of electric equipment
together with household waste
material!
In observance of the European
Directive, on Waste Electric and
Electronic Equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible
recycling facility.
ENE019-1
Intended use
The tool is intended for the sawing of wood, plastic and
metal materials. As a result of the extensive accessory
and saw blade program, the tool can be used for many
purposes and is very well suited for curved or circular
cuts.
ENF002-2
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
ENG905-1
Noise
The typical A-weighted noise level determined
according to EN60745:
Sound pressure level (L
pA
) : 85 dB (A)
Sound power level (L
WA
) : 96 dB (A)
Uncertainty (K) : 3 dB (A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Model 4351T
Work mode : cutting boards
Vibration emission (a
h,B
) : 7.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode : cutting sheet metal
Vibration emission (a
h,M
) : 4.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
Model 4351CT,4351FCT
Work mode : cutting boards
Vibration emission (a
h,B
) : 6.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode : cutting sheet metal
Vibration emission (a
h,M
) : 4.5 m/s
2
Uncertainty (K) : 1.5 m/s
2

Makita 4351T Specifications

General

Brand	Makita
Model	4351T
Category	Power Tool
Language	English