Makita 6203D User Manual

2
SPECIFICATIONS
Model 6203D 6213D 6313D 6233D 6333D
Capacities
Steel .............................. 10 mm 10 mm 13 mm 10 mm 13 mm
Wood ............................. 25 mm 25 mm 25 mm 25 mm 25 mm
Wood screw ................... 6.4 x 76 mm 6.4 x 76 mm 6.4 x 76 mm 6.4 x 76 mm 6.4 x 76 mm
Machine screw .............. 6 mm 6 mm 6 mm 6 mm 6 mm
No load speed (min
-1
)
High ............................... 0 – 1,200 0 – 1,400 0 – 1,400 0 – 1,300 0 – 1,300
Low ................................ 0 – 400 0 – 450 0 – 450 0 – 400 0 – 400
Overall length ................... 233 mm 233 mm 243 mm 233 mm 243 mm
Net weight ........................ 1.7 kg 1.9 kg 2.0 kg 2.0 kg 2.1 kg
Rated voltage ................... D.C. 9.6 V D.C. 12 V D.C. 12 V D.C. 14.4 V D.C. 14.4 V
• Due to our continuing programme of research and development, the specifications herein are subject to
change without notice.
• Note: Specifications may differ from country to country.
For European countries only
Noise and Vibration of Model 6203D
The typical A-weighted sound pressure level is 67 dB (A).
The noise level under working may exceed 85 dB (A).
– Wear ear protection. –
The typical weighted root mean square acceleration
value is not more than 2.5 m/s
2
.
Noise and Vibration of Model 6213D/6313D
The typical A-weighted sound pressure level is 71 dB (A).
The noise level under working may exceed 85 dB (A).
– Wear ear protection. –
The typical weighted root mean square acceleration
value is not more than 2.5 m/s
2
.
Noise and Vibration of Model 6233D/6333D
The typical A-weighted sound pressure level is 68 dB (A).
The noise level under working may exceed 85 dB (A).
– Wear ear protection. –
The typical weighted root mean square acceleration
value is not more than 2.5 m/s
2
.
EC-DECLARATION OF CONFORMITY
ENH002-1
We declare under our sole responsibility that this product
is in compliance with the following standards of standard-
ized documents,
EN50260, EN55014
in accordance with Council Directives, 89/336/EEC and
98/37/EC.
Ya su h i ko K a nz ak i CE 2003
Director
MAKITA INTERNATIONAL EUROPE LTD.
Michigan Drive, Tongwell, Milton Keynes,
Bucks MK15 8JD, ENGLAND
EC-DECLARATION OF CONFORMITY
ENH005-1
We declare under our sole responsibility that this product
is in compliance with the following standards of standard-
ized documents,
EN60335, EN55014, EN61000
in accordance with Council Directives, 73/23/EEC and
89/336/EEC.
Yasuhiko Kanzaki CE 2003
Director
MAKITA INTERNATIONAL EUROPE LTD.
Michigan Drive, Tongwell, Milton Keynes,
Bucks MK15 8JD, ENGLAND

Makita 6203D Specifications

General

Brand	Makita
Model	6203D
Category	Drill
Language	English