Makita 9565CR User Manual

18 ENGLISH
- Application 125 mm model
13 Wire brushing Wire cup brush
14 Hole cutting Hole cutter
15 - Wheel guard (for cut-o󰀨 wheel)
16 Cutting-o󰀨 Abrasive cut-o󰀨 wheel / Diamond wheel
17 Grinding / Cutting-o󰀨 Dual purpose wheel
18 - Clip-on cutting wheel guard attachment *3
19 - Dust collecting wheel guard for cut-
ting-o󰀨 *4
20 Cutting-o󰀨 Diamond wheel
21 - Dust collecting wheel guard for grinding *5
22 Grinding Cup-type diamond wheel *5
- - Lock nut wrench
- - Dust cover attachment
NOTE: *1 Do not use Super ange and Ezynut together.
NOTE: *2 Only for tools with M14 spindle thread.
NOTE: *3 Clip-on cutting wheel guard attachment is not available in some countries. For more details, refer to the
instruction manual of the clip-on cutting wheel guard attachment.
NOTE: *4 For more details, refer to each instruction manual of the guard.
NOTE: *5 For more details, refer to each instruction manual of the guard.
OPTIONAL
ACCESSORIES
CAUTION: These accessories or attachments
are recommended for use with your Makita tool
specied in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Accessories listed in "COMBINATION OF
APPLICATIONS AND ACCESSORIES"
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
di󰀨er from country to country.

Makita 9565CR Specifications

General

Spindle thread	M14
Idle speed (max)	12000 RPM
Grinding disc diameter	125 mm
Input power	1400 W
Power source	AC
Product color	Black, Cyan, Silver

Weight and Dimensions

Width	139 mm
Height	103 mm
Length	299 mm
Weight	2200 g