2
SPECIFICATIONS
• Manufacturer reserves the right to change specifications without notice.
• Specifications may differ from country to country.
IMPORTANT SAFETY INSTRUCTIONS USB087-1
WARNING: WHEN USING THIS TOOL, BASIC SAFETY PRECAU-
TIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE
RISK OF PERSONAL INJURY, INCLUDING THE FOLLOWING:
READ ALL INSTRUCTIONS.
1. For personal safety and proper operation
and maintenance of the tool, read this
instruction manual carefully before using
the tool.
2. Always wear safety glasses to protect
your eyes from dust or nail injury. The
safety glasses should conform with the
requirements of ANSI Z87.1.
WARNING:
It is an employer's responsibility to
enforce the use of safety eye protection
equipment by the tool operators and by
other persons in the immediate working
area.
3. Wear hearing protection to protect your
ears against exhaust noise and head pro-
tection. Also wear light but not loose
clothing. Sleeves should be buttoned or
rolled up. No necktie should be worn.
4. Rushing the job or forcing the tool is dan-
gerous. Handle the tool carefully. Do not
operate when under the influence of alco-
hol, drugs or the like.
5. General Tool Handling Guidelines:
(1) Always assume that the tool contains
fasteners.
(2) Do not point the tool toward yourself
or anyone whether it contains fasten-
ers or not.
(3) Do not actuate the tool unless the tool
is placed firmly against the workpiece.
(4) Respect the tool as a working imple-
ment.
(5) No horseplay.
(6) Do not hold or carry the tool with a fin-
ger on the trigger.
Model AN451
Air pressure
4.5 - 8.5 kgf/cm
2
G (65 - 120 PSIG)
Nail length 22 mm (7/8”) - 45 mm (1-3/4”)
Nail capacity 120 pcs.
Min. hose diameter 6.5 mm (1/4”)
Dimensions (L X H X W)
245 mm X 265 mm X 114 mm
(9-5/8” X 10-3/8” X 4-1/2”)
Net weight 2.3 kg (5.1 lbs)
To Next Page
Loading...
Need help?
General
