Makita BTM40 User Manual

2
ENGLISH (Original instructions)
SPECIFICATIONS
Model BTM40 BTM50
Oscillation per minute 6,000 - 20,000 (min
-1
)
Oscillation angle, left/right 1.6 ﾟ (3.2 ﾟ total)
Overall length 324 mm
Standard battery cartridge BL1430 BL1415 * BL1830 BL1815 *
without dust extraction attachment 1.9 kg 1.7 kg 2.0 kg 1.8 kg
Net weight
with dust extraction attachment 2.0 kg 1.8 kg 2.1 kg 1.9 kg
Rated voltage D.C. 14.4 V D.C. 18 V
* NOTE: For continuous operation, high capacity battery cartridge BL1430 and BL1830 is recommended.
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
END221-2
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･ Read instruction manual.
･ Wear safety glasses.
･ Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
ENE080-1
Intended use
The tool is intended for sawing and cutting wood, plastic,
gypsum, non-ferrous metals, and fastening elements (e.
g. unhardened nails and staples). It is also intended for
working soft wall tiles, as well as dry sanding and
scraping of small surfaces. It is especially for working
close to edge and flush cutting.
ENG905-1
Noise
The typical A-weighted noise level determined according
to EN60745:
Work mode: Sanding
Sound pressure level (L
pA
) : 78 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Work mode: Cutting with plunge cut saw blade
Model BTM40
Sound pressure level (L
pA
) : 82 dB(A)
Sound power level (L
WA
) : 93 dB(A)
Uncertainty (K) : 3 dB(A)
Model BTM50
Sound pressure level (L
pA
) : 84 dB(A)
Sound power level (L
WA
) : 95 dB(A)
Uncertainty (K) : 3 dB(A)
Work mode: Cutting with segmental saw blade
Sound pressure level (L
pA
) : 81 dB(A)
Sound power level (L
WA
) : 92 dB(A)
Uncertainty (K) : 3 dB(A)
Work mode: Scraping
Model BTM40
Sound pressure level (L
pA
) : 81 dB(A)
Sound power level (L
WA
) : 92 dB(A)
Uncertainty (K) : 3 dB(A)
Model BTM50
Sound pressure level (L
pA
) : 83 dB(A)
Sound power level (L
WA
) : 94 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
Cd
Ni-MH
Li-ion

Makita BTM40 Specifications

General

Brand	Makita
Model	BTM40
Category	Power Tool
Language	English