To Next Page

To Previous Page

5 ENGLISH

ENGLISH (Original instructions)

SPECIFICATIONS

Model: CB100D DCB200

Material Outer: 100% Polyester

Batting: 100% Polyester

Liner: 100% Polyester

Temperature adjustment

steps

Size (L x W) 700 mm x 1,400 mm (27-9/16″ x 55-1/8″)

Net weight * 0.58 kg (1.28 lb)

* Approximate weight without battery holder, battery cartridge, extension cord, and storage bag.

Specications for battery holder and battery cartridge

USB power supply port D.C. 5 V, 2.4 A, Type A

Rated voltage D.C. 10.8 V - 12 V max

D.C. 14.4 V

D.C. 18 V

Battery cartridge 10.8 V - 12V max BL1015 / BL1016 / BL1020B / BL1021B /

BL1040B / BL1041B

14.4 V BL1415 / BL1415N / BL1430 / BL1430B /

BL1440 / BL1450 / BL1460B

18 V BL1815 / BL1815N / BL1820 / BL1820B /

BL1830 / BL1830B / BL1840 / BL1840B /

BL1850 / BL1850B / BL1860B

• Due to our continuing program of research and development, the specications herein are subject to change

without notice.

• Specications and battery cartridge may differ from country to country.

WARNING: Only use the battery cartridges listed above. Use of any other battery cartridges may cause

injury and/or re.

Combination of battery holder and blanket

For the combination of battery holder and blanket, refer to the table below.

• For the battery of 10.8 V - 12 V max, use battery holder “YL00000003” or “YL00000023”.

• For the battery of 14.4 V or 18V, use battery holder “YL00000004” or “YL00000024”.

Model Battery Part number of battery holder

CB100D 10.8 V - 12 V max YL00000003 or YL00000023

DCB200 14.4 V or 18V YL00000004 or YL00000024

NOTE: The available battery holder varies depending on the country.

Makita CB100D User Manual

Questions and Answers: