Makita DA3010F User Manual

6
FUNCTIONAL
DESCRIPTION
CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.
Switch action
CAUTION:
• Before plugging in the tool, always check to see that the
switch lever actuates properly and returns to the “OFF”
position when released.
To start the tool, simply squeeze the switch lever. Tool speed
is increased by increasing pressure on the switch lever.
Release the switch lever to stop.
A speed control screw is provided so that maximum tool
speed can be limited (variable).
Turn the speed control screw clockwise for higher speed, and
counterclockwise for lower speed.
Reversing switch action
CAUTION:
• Always check the direction of rotation before operation.
• Use the reversing switch only after the tool comes to a
complete stop. Changing the direction of rotation before
the tool stops may damage the tool.
This tool has a reversing switch to change the direction of
rotation. Move the reversing switch lever to the position
(A side) for clockwise rotation or the position (B side) for
counterclockwise rotation.
Lighting up the lamps
CAUTION:
• Do not look in the light or see the source of light directly.
To turn on the lamp, start the tool. Then, the lamp lights up
the top of the bit. To turn it off, stop the tool.
NOTE:
• Use a dry cloth to wipe the dirt off the lens of lamp. Be
careful not to scratch the lens of lamp, or it may lower the
illumination.
1. Lamp
2. Speed control screw
3. Switch lever
4. Higher
5. Lower
1
2
3
4
5
003795
1. Reversing switch lever
11
AB
003796

Makita DA3010F Specifications

General

Torque (max)	14.6 N⋅m
Drilling diameter in wood (max)	25 mm
Drilling diameter in steel (max)	10 mm
Chuck type	-
Hammer drilling	No
Input power	450 W
Power source	AC

Weight and Dimensions

Depth	270 mm
Width	61 mm
Height	79 mm
Weight	1400 g