PRODUCT
P 1/ 24
Optional accessories
Finish nails
Battery BL1815
Battery BL1815N
Battery BL1820
Battery BL1830
Battery BL1840
Battery BL1850
Fast charger DC18RC
Charger DC18SD
Charger DC24SC
Four port multi charger DC18SF
Automotive charger DC18SE
Standard equipment
Nose adapter ................. 1
Hex wrench 3 ................ 1
Plastic carrying case ...... 1
(for some countries only)
Models No.
Description
CONCEPT AND MAIN APPLICATIONS
DBN500
Cordless brad nailer 50mm (2")
DBN500 is cordless brad nailer powered by 18V Li-ion battery.
Compressed air generated by piston work with DC motor pushes down Driver to
shoot Brad nails. The mechanism provides less reaction force and “air nailer like”
shot feeling to the operator.
Other features are as follows:
• Higher durability than competitors’ models
• Easy-to-see slim nose tip
• Rocker switch to select Sequential mode / Bump fire mode
Specification
W
L
H
Length: mm (")
Type
Nail
Battery
Finish
15, 20, 25, 30, 32, 35, 38, 40, 45, 50
(5/8, 3/4, 1, 1-3/16, 1-1/4, 1-3/8, 1-1/2, 1-5/8, 1-3/4, 2)
Magazine capacity (pcs)
Shot quantity on a single full battery charge
Quick response (pcs/sec.) 2
Weight according to EPTA-Procedure 01/2003: kg (lbs)
3.3 (7.3), 3.3 (7.3), 3.5 (7.7), 3.5 (7.7), 3.5 (7.7) *6
*3 One nail is fired first by pushing Contact arm against workpiece, then by pulling Trigger with the Contact arm
kept pushed; nail cannot be fired when the steps are reversed. Another one can be fired by releasing Trigger,
then by repeating the steps; however, cannot be fired if Trigger is not released before repetition of the steps.
*4 Nail is fired first by pulling Trigger then by bumping Contact arm against workpiece with Trigger kept pulled.
As long as Trigger is kept pulled, nails can be fired one after the other continuously every time when Contact arm
is bumped against workpiece.
*5 Nail is fired first by pushing Contact arm against workpiece then by pulling Trigger with Contact arm kept pushed.
Another nail can be fired by releasing then re-pulling Trigger even if Contact arm is kept pushed;
another nail cannot be fired if Trigger is not released.
*6 2.9kg (5.5lbs) without Battery
Nail gauge
18Ga
Nails per strip 100
110
1,000*
1
LED job light Yes
1.5, 2.0, 3.0, 4.0, 5.0
24, 27, 54, 72, 90
18
Li-ion
15, 24, 22, 36, 45 with DC18RC
Voltage: V
Capacity: Ah
Cell
Charging time (approx.): min.
Energy capacity: Wh
Yes
Yes (Tool-less)
Rocker switch
Driving depth adjustment
Anti-dry-fire mechanism
Change of Bump fire mode and sequential mode
2 mode pattern
Operation
mode
Auto change mode between
Bump fire
*4 and single fire*5
Sequential*3
97 (3-13/16)*2
Dimensions: mm (")
Width (W)
Height (H)
Length (L) 294 (11-5/8)*
1
318 (12-1/2)
*1
With Battery BL1830
*2 103mm (4-16") when using Hook
Note: The standard equipment may vary by country
or model variation.
T
ECHNICAL INFORMATION
460Max output (W)
Battery .................. 1 or 2*
8
Charger ................. 1*8
Battery cover......... 1*9
Safety goggles ...... 1
*8 Battery and charger are not supplied with “Z” model
*9 Supplied with the same quantity of extra Battery
OFFICIAL USE
for ASC & Sales Shop
To Next Page
Need help?
General
