Makita DF333DSAJ User Manual

5 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
DF333D
DF033D
Drilling capacities
Steel
10 mm
Wood
21 mm
Fastening capacities
Wood screw
5.1 mm x 63 mm
Machine screw
M6
No load speed
High (2)
0 - 1,700 min
-1
Low (1)
0 - 450 min
-1
Overall length
179 mm
149 mm
Rated voltage
D.C. 10.8 V - 12 V max
Net weight
1.1 - 1.2 kg
0.93 - 1.1 kg
• Due to our continuing program of research and development,
the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including
the battery cartridge. The lightest and heaviest combination,
according to EPTA-Procedure 01/2014, are shown in the
table.
Applicable battery cartridge and charger
Battery cartridge
BL1015 / BL1016 / BL1020B
/ BL1021B / BL1040B
/ BL1041B
Charger
DC10SA / DC10SB / DC10WC
/ DC10WD / DC18RE
• Some of the battery cartridges and chargers listed above may
not be available depending on your region of
residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any
other battery cartridges and chargers may cause injury and/or
fire.
Intended use
The tool is intended for drilling and screw driving in
wood, metal and plastic.
Noise
The typical A-weighted noise level
determined according to EN62841-2-1:
Model DF333D
Sound pressure level (L
pA
) : 70
dB(A) or less
Uncertainty (K) : 3 dB(A)
The noise level under working
may exceed 80 dB (A).
Model DF033D
Sound pressure level (L
pA
) : 70
dB(A) or less
Uncertainty (K) : 3 dB(A)
The noise level under working
may exceed 80 dB (A).
WARNING: Wear ear protection.

Makita DF333DSAJ Specifications

General

Brand	Makita
Model	DF333DSAJ
Category	Drill
Language	English