Makita DFT044F User Manual

2
ENGLISH (Original instructions)
SPECIFICATIONS
Model DFT022F DFT044F DFT084F DFT126F
Hard joint 0.5 - 2 N•m 1 - 4 N•m 3 - 8 N•m 5 - 12 N•m
Fastening torque
Soft joint 0.5 - 2 N•m 1 - 4 N•m 3 - 8 N•m 5 - 12 N•m
No load speed (min
-1
) 700 950 780 410
200 x 74 x 250 mm (with Battery Cartridge BL1430)
Dimensions
200 x 74 x 235 mm (with Battery Cartridge BL1415)
1.5 kg (with Battery Cartridge BL1430)
Net weight
1.4 kg (with Battery Cartridge BL1415)
Rated voltage D.C. 14.4 V
Battery cartridge BL1415 / BL1415N / BL1430 / BL1430A / BL1440 / BL1450
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
END004-6
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･ Read instruction manual.
･ Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of the European
Directives, on Waste Electric and
Electronic Equipment and Batteries and
Accumulators and Waste Batteries and
Accumulators and their implementation
in accordance with national laws,
electric equipment and batteries and
battery pack(s) that have reached the
end of their life must be collected
separately and returned to an
environmentally compatible recycling
facility.
ENE033-1
Intended use
The tool is intended for screw driving in wood, metal
and plastic.
ENG905-1
Noise
The typical A-weighted noise level determined
according to EN60745:
Sound pressure level (L
pA
) : 70 dB (A) or less
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Work mode: screwdriving without impact
Vibration emission (a
h
) : 2.5 m/s
2
or less
Uncertainty (K) : 1.5 m/s
2
ENG901-1
•
The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENH101-18
For European countries only
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine:
Cordless Screwdriver
Model No./ Type: DFT022F, DFT044F, DFT084F, DFT126F
Conforms to the following European Directives:
2006/42/EC
Cd
Ni-MH
Li-ion

Makita DFT044F Specifications

General

Brand	Makita
Model	DFT044F
Category	Power Screwdriver
Language	English