EasyManuals Logo
Home>Makita>Planer>DKP181Z

Makita DKP181Z User Manual

Makita DKP181Z
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background image
20 ENGLISH
MAINTENANCE
CAUTION: Always be sure that the tool is
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
NOTICE: Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
Chip discharge opening cleaning
Clean the chip discharge opening regularly.
Use a compressed air to clean the clogged chip dis-
charge opening.
Sharpening the blades
For conventional planer blades only
Always keep your blades sharp for the best perfor-
mance possible. Use the sharpening holder to remove
nicks and produce a ne edge.
Fig.46: 1. Sharpening holder
First, loosen the two wing nuts on the holder and insert
the blades (A) and (B), so that they contact the sides
(C) and (D). Then tighten the wing nuts.
Fig.47: 1. Wing nut 2. Blade (A) 3. Blade (B) 4. Side
(D) 5. Side (C)
Immerse the dressing stone in water for 2 or 3 minutes
before sharpening. Hold the holder so that the both
blades contact the dressing stone for simultaneous
sharpening at the same angle.
Fig.48
OPTIONAL
ACCESSORIES
CAUTION: These accessories or attachments
are recommended for use with your Makita tool
specied in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• High-speed steel Planer blade
• Tungsten-carbide Planer blade (For longer blade
life)
• Mini planer blade
• Sharpening holder assembly
Blade gauge
Set plate set
• Edge fence (Guide rule)
Dressing stone
• Dust bag assembly
• Elbow
• Chamfering rule assembly
Wireless unit
• Makita genuine battery and charger
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Makita DKP181Z and is the answer not in the manual?

Makita DKP181Z Specifications

General IconGeneral
Power sourceBattery
Battery voltage18 V
Battery includedNo
Idle speed12000 RPM
Rebating depth25 mm
Vibration level5 m/s²
Sound power level95 dB
Planing depth (max)3 mm
Planning width (max)82 mm
Sound pressure level84 dB
Sound level uncertainty3 dB
Vibration level uncertainty2.5 m/s²
Motor typeBrushless
Product colorTurquoise
Weight and Dimensions IconWeight and Dimensions
Weight3300 g
Package weight3600 g

Related product manuals