Do you have a question about the Makita DTD156ZJ and is the answer not in the manual?
| Type | Impact Driver |
|---|---|
| Voltage | 18V |
| Max Torque | 165 Nm |
| Impact Rate | 0 - 3, 600 ipm |
| Chuck Type | 1/4" Hex |
| Driving Shank | 1/4" Hex |
| Machine Screw | M4 - M8 |
| Coarse thread screw (length) | 22 - 125 mm |
| Battery Type | Li-ion |
Loading...