Makita DUA301PT2 User Manual

11 ENGLISH
Adjusting the pipe length
To extend or shorten the pipe, loosen the lock ring by
turningthelockringcounterclockwise,thenadjustthe
length of the pipe, and then tighten the ring by turning
the lock ring clockwise.
1
2
►1. Lock ring 2. Pipe
Electronic function
The tool is equipped with the electronic functions for
easy operation.
• Constant speed control
The speed control function provides the constant
rotation speed regardless of load conditions.
ASSEMBLY
CAUTION: Always be sure that the tool is
switched o󰀨 and the battery cartridge is removed
before carrying out any work on the tool.
CAUTION: Do not touch the saw chain with
bare hands. Always wear gloves when handling
the saw chain.
Assembling the tool
1. Remove 2 caps from the pipe, and 1 cap from the
head of the tool.
11
1
2
3
►1. Cap 2. Pipe 3. Head of tool
2. Loosen 3 bolts, and then remove 1 bolt using the
hex wrench.
1
►1. Bolt
3. Insert the pipe into the tool body all the way, and
then align the hole on the pipe with the hole on the tool
body.
1
2
►1. Hole 2. Pipe

Makita DUA301PT2 Specifications

General

Brand	Makita
Model	DUA301PT2
Category	Pole Saw
Language	English