To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...Why does my Makita DUC122 Chainsaw not start?
Your Makita Chainsaw might not start because the battery cartridge isn't installed properly. Make sure to install the charged battery cartridge. Alternatively, the battery might be low. Try recharging it, and if that doesn't work, replace the battery cartridge.
What to do if there is no oil on the chain of my Makita Chainsaw?
If there's no oil on the chain of your Makita Chainsaw, first check if the oil tank is empty and fill it up if needed. Also, the oil guide groove might be dirty, so try cleaning it.
Why is my Makita DUC122 Chainsaw not reaching maximum RPM?
Your Makita Chainsaw might not reach maximum RPM because the battery cartridge is installed improperly. Ensure it's correctly installed as described in the manual. Also, a low battery charge level could be the cause. Recharge the battery, and if that doesn't work, replace it.
General| Idle speed | - RPM |
|---|---|
| Chain brake | Yes |
| Chain pitch | 1/4 \ |
| Chain speed | 5 m/s |
| Blade length | - mm |
| Product color | Black, Blue |
| Chain bar length | 115 mm |
| Power source | Battery |
| Battery capacity | 5 Ah |
| Uncertainty K | 2 m/s² |
| Sound power level | 92.7 dB |
| Vibration emission | 4.3 m/s² |
| Sound pressure level | 84.6 dB |
Weight and Dimensions| Width | 195 mm |
|---|---|
| Height | 215 mm |
| Length | 422 mm |
| Weight | 2500 g |
Key safety guidelines for operating the cordless chain saw.
Defines the proper application and purpose of the tool.
Explains kickback causes and how operators can prevent it.
Provides guidance on how to prolong the lifespan of the battery cartridge.
Steps for fitting and removing the battery pack from the tool.
Explains the system that automatically cuts off power to extend battery life.
How to start and stop the tool using the trigger and lock-off button.
Procedures for fitting and removing the saw chain and guide bar.
Guide on how to properly set the tension of the saw chain.
Instructions for installing the optional spike bumper accessory.
Details on the automatic lubrication system for the saw chain.
Guidance on how to sharpen the saw chain correctly.
Instructions for using files and guides for sharpening the chain.
How to clean the groove in the guide bar for optimal oil flow.
Steps to clean the oil filter to ensure proper chain lubrication.
Details on noise levels for different models and recommended protection.
