To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...Why won't my Makita DUC252Z start?
Your Makita Chainsaw might not start for a couple of reasons. First, make sure that two charged battery cartridges are correctly installed. If the batteries are installed, the issue might be low battery voltage. Try recharging the battery cartridge. If that doesn't work, you may need to replace the battery cartridge.
What to do if my Makita DUC252Z motor stops running after a little use?
If the motor stops running after a short period, it's likely due to a low battery charge. Recharge the battery cartridge. However, if recharging isn't effective, consider replacing the battery cartridge.
Why is there no oil on the chain of my Makita Chainsaw?
If there's no oil on the chain, check these things: - Ensure the oil tank isn't empty and fill it if needed. - See if the oil guide groove is dirty and clean it. - Verify that the oil delivery is adjusted properly and adjust it if necessary.
Why doesn't my Makita DUC252Z Chainsaw reach maximum RPM?
If your chainsaw isn't reaching maximum RPM, there could be a few reasons. First, ensure the battery cartridge is installed correctly as described in this manual. Also, the battery power might be dropping, so try recharging the battery cartridge, and if that doesn't work, replace it. If these steps don't resolve the issue, it's possible that the drive system isn't working correctly.
What to do if my Makita DUC252Z Chainsaw chain does not run?
If the chain doesn't run, the chain brake might be activated. Release the chain brake.
List of chainsaw components in English.
List of chainsaw components in French.
Technical specifications for DUC252 and DUC302 chain saw models.
Explanation of symbols utilized on the equipment.
Specific safety instructions for cordless chain saw operation.
Defines the proper application and intended use of the chain saw.
Details required personal protective equipment for chain saw operation.
Tips for maximizing battery cartridge lifespan and overall performance.
Overview of the tool's functions and key operating systems.
Explanation of the tool's automatic power cutoff mechanism during overload conditions.
Description of automatic shutdown mechanism due to overheating.
Indication and protection methods for battery overdischarge.
Method for checking the remaining charge level of the battery.
Instructions for using the switch trigger and the lock-off button.
Step-by-step guide for fitting and removing the saw chain assembly.
Procedures for adjusting chain tension and verifying chain lubrication.
Guidance on pruning, bucking, and general chainsaw handling techniques.
Instructions and safety precautions for safe tree felling.
Safety and techniques for removing branches from felled trees (limbing).
Specialized cutting techniques for specific wood grain applications (burrowing/parallel cuts).
Guidelines for maintaining a sharp and effective saw chain for optimal performance.
Guidance on using files and guides for saw chain sharpening.
Instructions for cleaning the guide bar groove and oil discharge hole.
Steps for replacing the drive sprocket and worn carbon brushes.
Recommendations for proper storage of the tool after use.
Table outlining periodic maintenance tasks and their recommended frequency.
Details on the sound pressure and power levels of the chain saw.
Information on the measured vibration levels during chain saw operation.
General
