2
ENGLISH (Original instructions)
SPECIFICATIONS
Model DUR141 DUR181
No load speed 6,000 min
-1
7,800 min
-1
Overall length 1,229 mm - 1,433 mm 1,229 mm - 1,433 mm
Cutting diameter with nylon cutting head 260 mm 260 mm
Net weight 2.9 kg 3.0 kg 2.9 kg 3.1 kg
Rated voltage D.C. 14.4 V D.C. 18 V
Standard battery cartridge(s)
Warning: Use only the battery cartridge(s) described.
BL1415
BL1430 /
BL1440
BL1815 / BL1815N /
BL1820
BL1830 /
BL1840
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
END017-3
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･ Take particular care and attention.
･ Read instruction manual.
･ Danger; be aware of thrown objects.
･ The distance between the tool and
bystanders must be at least 15 m.
･ Keep bystanders away.
･ Keep distance at least 15 m.
･ Avoid kickback.
･ Wear a helmet, goggles and ear
protection.
･ Wear protective gloves.
･ Wear sturdy boots with nonslip soles.
Steeltoed safety boots are
recommended.
･ Do not expose to moisture.
･ Top permissible tool speed.
･ Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of European Directive
2012/19/EU on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
ENG905-1
Noise
The typical A-weighted noise level determined
according to EN786:
Model DUR141
Sound pressure level (L
pA
) : 75 dB (A)
Sound power level (L
WA
) : 83.7 dB (A)
Uncertainty (K) : 2.5 dB (A)
Model DUR181
Sound pressure level (L
pA
) : 82 dB (A)
Sound power level (L
WA
) : 88.5 dB (A)
Uncertainty (K) : 2.5 dB (A)
Wear ear protection
ENG904-2
Vibration
The vibration total value determined according to
EN786:
Vibration emission (a
h
) : 2.5 m/s
2
or less
Uncertainty (K) : 1.5 m/s
2
ENG901-1
•
The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
Cd
Ni-MH
Li-ion
To Next Page
Loading...
Need help?
General
