Makita DUR181Z User Manual

8 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: UR100D
No load speed
(without cutting tool)
10,000 min
-1
Overall length
(without cutting tool)
835 - 1,185 mm
Nylon cord diameter 1.65 mm
Applicable cutting tool and
cutting diameter
Nylon cutting head
(P/N 198852-2 / 198853-0)
260 mm
Plastic blade head
(P/N 198847-5 / 198848-3)
230 mm
Rated voltage D.C. 10.8 V - 12 V max
Standard battery cartridge BL1015 / BL1016 / BL1020B / BL1021B / BL1040B / BL1041B
Net weight 1.9 - 2.1 kg
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsandbatterycartridgemaydifferfromcountrytocountry.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Noise
Applicable standard : EN50636
Type Sound pressure level average
L
PA
(dB(A)) Uncertainty K (dB(A))
Nylon cutting head 74 0.74
Plastic blade 75.8 2.84
• Even if the sound pressure level listed above is 80 dB (A) or less, the level under working may exceed 80 dB
(A). Wear ear protection.
Vibration
Applicable standard : EN50636
Type Left hand Right hand
a
h,W
(m/s
2
) Uncertainty K (m/s
2
) a
h,W
(m/s
2
) Uncertainty K (m/s
2
)
Nylon cutting head
2.5
0.1
2.5
0.5
Plastic blade
2.5
0.1
2.5
0.1
NOTE: The declared vibration emission value has been measured in accordance with the standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration emission value may also be used in a preliminary assessment of exposure.
WARNING: The vibration emission during actual use of the power tool can differ from the declared emission
value depending on the ways in which the tool is used.
WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation of
exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when
the tool is switched off and when it is running idle in addition to the trigger time).

Makita DUR181Z Specifications

General

Power source	Battery
Battery voltage	18 V
Product color	Black, Blue, Metallic
Uncertainty K	1.5 m/s²
Plant protector	Yes
Rotational speed	7800 RPM
Vibration emission	2.5 m/s²
Sound pressure level	82 dB
Cutting diameter (max)	260 mm
Sound power level guaranteed	91 dB
Sound power level uncertainty	88.5 dB
Sound pressure level uncertainty	2.5 dB

Weight and Dimensions

Depth	257 mm
Width	267 mm
Length	1433 mm
Weight	3100 g