Makita DUR366L User Manual

11 ENGLISH
When not in use, store the hex wrench as shown in the
guretokeepitfrombeinglost.
OPERATION
Correct handling of tool
Correct posture
WARNING:
• Always position the tool on your right-hand
side. Correct positioning of the tool allows for
maximum control and will reduce the risk of
seriouspersonalinjurycausedbykickback.
• Be extremely careful to maintain control of
the tool at all times. Do not allow the tool to
be deected toward you or anyone in the
work vicinity. Failure to keep control of the tool
couldresultinseriousinjurytothebystander
and the operator.
Shoulder harness
Optional accessory
Attachment of shoulder harness
1
2
►1. Buckle 2. Hook
Put the shoulder harness on. Then connect the buckles
on both the hook and the harness. Be sure that the
buckles click and lock completely in place.
Detachment
1
►1. Buckle
The buckle is provided with a means of quick release.
Simply squeeze the sides and the buckle to release the
tool.
Adjustment of the hanger position
and shoulder harness
1
►1. Hex bolt
To change the hanger position, loosen the hex bolt on
the hanger with the supplied wrench. Then move the
hanger.
Afteradjustingthehangerposition,tightenthehexbolt
with the wrench securely.
MAINTENANCE
WARNING:
• Always be sure that the tool is switched
off and battery cartridge is removed before
attempting to perform inspection or main-
tenance on the tool. Failure to switch off and
remove the battery cartridge may result in seri-
ouspersonalinjuryfromaccidentalstart-up.
NOTICE:
Never use gasoline, benzine, thinner, alcohol or
the like. Discoloration, deformation or cracks may
result.

Makita DUR366L Specifications

General

Brand	Makita
Model	DUR366L
Category	Trimmer
Language	English