Makita GA7031 User Manual

7
FUNCTIONAL DESCRIPTION
CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function on
the tool.
Shaft lock
CAUTION:
• Never actuate the shaft lock when the spindle is
moving. The tool may be damaged.
1
010780
Press the shaft lock to prevent spindle rotation when
installing or removing accessories.
Switch handle mounting positions
1
2
3
010342
The switch handle can be rotated to either 90° left or right
to fit your work needs. First, unplug the tool. Press the lock
button and rotate the switch handle to left or right fully. The
switch handle will be locked in that position.
CAUTION:
• Always make sure that the switch handle is locked
in the desired position before operation.
Switch action
1
2
010343
For tool with lock-off button
CAUTION:
• Before plugging in the tool, always check to see
that the switch trigger actuates properly and
returns to the "OFF" position when released.
• Do not pull the switch trigger hard without
pressing in the lock-off button. This can cause
switch breakage.
To prevent the switch trigger from being accidentally
pulled, a lock-off button is provided.
To start the tool, depress the lock-off button and then pull
the switch trigger. Release the switch trigger to stop.
For tool with lock button
CAUTION:
• Before plugging in the tool, always check to see
that the switch trigger actuates properly and
returns to the "OFF" position when released.
• Switch can be locked in "ON" position for ease of
operator comfort during extended use. Apply
caution when locking tool in "ON" position and
maintain firm grasp on tool.
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
For continuous operation, pull the switch trigger and
then push in the lock button, and then release the switch
trigger.
To stop the tool from the locked position, pull the switch
trigger fully, then release it.
ASSEMBLY
CAUTION:
• Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.
Installing side grip (handle)
CAUTION:
• Always be sure that the side grip is installed
securely before operation.
010781
Screw the side grip securely on the position of the tool
as shown in the figure.
1. Lock button /
Lock-off button
2. Switch trigger
1. Motor housing
2. Lock button
3. Handle
1. Shaft lock

Makita GA7031 Specifications

General

Brand	Makita
Model	GA7031
Category	Grinder
Language	English