DOUBLE
INSULATION
Disc Grinder
230 mm (9”) MODEL GA9000
SPECIFICATIONS
Model GA9000
Depressed center wheel diameter .................................................................................................. 230 mm (9”)
No load speed (min
-1
)................................................................................................................................ 6,500
Overall length................................................................................................................................ 433 mm (17”)
Net weight ................................................................................................................................ 6.0 kg (13.2 lbs)
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
Power supply
The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and can only
be operated on single-phase AC supply. They are double-insulated in accordance with European Standard and can,
therefore, also be used from sockets without earth wire.
To Next Page
Need help?
General
