Need help?Do you have a question about the Makita GA9000 and is the answer not in the manual?
General| Power Source | Corded Electric |
|---|---|
| No Load Speed | 6, 600 RPM |
| Amperage | 15 A |
| Voltage | 120 V |
| Wheel Diameter | 9 inch |
| Arbor Size | 5/8 in |
| Spindle Thread | 5/8" x 11 UNC |
Details the disc grinder's model, wheel diameter, no load speed, overall length, and net weight.
Outlines the necessary power supply voltage and emphasizes the tool's double insulation feature.
Labels and identifies the various external parts of the disc grinder as depicted in the diagrams.
Covers safety for the work environment, preventing electric shock, keeping children away, and personal protection like clothing and eyewear.
Focuses on proper tool usage, avoiding forcing, securing work, and essential maintenance practices to prevent injury.
Details additional safety precautions, warnings on accessory use, repair safety, and hazards like sparks and hot surfaces.
Step-by-step instructions for correctly mounting the wheel guard to the grinder, ensuring proper alignment and secure fastening.
Guidance on securely fitting the auxiliary side grip for improved handling and better control during operation.
Procedure for mounting a depressed center wheel, including the use of inner/outer flanges and tightening the super nut.
Steps for mounting and removing cut-off wheels, detailing flange orientation and lock nut tightening procedures.
Ensures the switch functions correctly before use, covering the lock-off button and trigger operation for safe starting and stopping.
Provides guidance on the correct operating angle, break-in for new wheels, and warnings against forcing the tool for safe grinding.
Instructions for replacing worn carbon brushes, emphasizing the need to replace both identical brushes simultaneously.
Presents a visual list of recommended accessories for the disc grinder, aiding in selection and understanding of optional parts.
To Next Page
