Makita HM1812 User Manual

7
• Hold the tool firmly with both hands. Turn the tool on
and apply slight pressure on the tool so that the tool
will not bounce around, uncontrolled. Pressing very
hard on the tool will not increase the efficiency.
• Do not pull out the tool if stuck. Instead, break the
work around the bit tip.
• Be sure to place the tool on the stable floor or
ground after use.
015606
Always use the soft grip (auxiliary handle) and firmly hold the
tool by both side grip and switch handle during operations.
MAINTENANCE
CAUTION:
• Store the machine in horizontal position to avoid
possible grease leakage.
• Never use gasoline, benzine, thinner, alcohol or
the like. Discoloration, deformation or cracks may
result.
To maintain product safety and reliability, repairs, any
maintenance or adjustment should be performed by
Makita Authorized Service Centers, always using Makita
replacement parts.
OPTIONAL ACCESSORIES
CAUTION:
• These accessories or attachments are
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
• Bull point
• Cold chisel
• Scaling chisel
• Clay spade
• Rammer
• Safety goggles
• Hammer / bit grease
• Dust extractor attachment
NOTE:
• Some items in the list may be included in the tool
package as standard accessories. They may differ
from country to country.

Makita HM1812 Specifications

General

Input power	2000 W
Impact energy (max)	72.8 J
Vibration level (chiseling)	6.5 m/s²
Soft grip	Yes
Product color	Black, Blue
Toolholder	- mm
Impact rate	870 bpm

Weight and Dimensions

Depth	210 mm
Width	843 mm
Height	608 mm