2
SPECIFICATIONS
Blade diameter : ............................................................................................. 255 mm (10”)
Hole diameter : ........................................................................................... 15.88 mm (5/8”)
Max. Miter angle : ....................................................................................Left 45°, Right 52°
Max. Cutting capacities (H x W)
No load speed (RPM) : ........................................................................................ 4,600/min.
Dimensions (L x W x H) :
.........530 mm x 476 mm x 532 mm (20-27/32” x 18-23/32” x 20-15/16”)
Net weight : ............................................................................................... 11.0 kg (24.2 lbs)
• Manufacturer reserves the right to change specifications without notice.
• Specifications may differ from country to country.
For Your Own Safety Read Instruction Manual
Before Operating Tool
Save it for future reference
GENERAL SAFETY PRECAUTIONS
USA007-1
(For All Tools)
1.
KNOW YOUR POWER TOOL. Read the
owner’s manual carefully. Learn the tool’s
applications and limitations, as well as the
specific potential hazards peculiar to it.
2.
KEEP GUARDS IN PLACE and in working
order.
3.
REMOVE ADJUSTING KEYS AND
WRENCHES. Form habit of checking to
see that keys and adjusting wrenches are
removed from tool before turning it on.
4.
KEEP WORK AREA CLEAN. Cluttered
areas and benches invite accidents.
5.
DON’T USE IN DANGEROUS ENVIRON-
MENT. Don’t use power tools in damp or
wet locations, or expose them to rain.
Keep work area well lighted. Don’t use
tool in presence of flammable liquids or
gases.
Miter angle
0° 45° (left and right)
90.5 mm x 95 mm
(3-9/16” x 3-3/4”)
69 mm x 130 mm
(2-3/4” x 5-1/8”)
90.5 mm x 67 mm
(3-9/16” x 2-5/8”)
69 mm x 92 mm
(2-3/4” x 3-5/8”)
To Next Page
Loading...
Need help?
General
