EasyManuals Logo
Home>Makita>Grinder>M9503R

Makita M9503R User Manual

Makita M9503R
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
8 ENGLISH
11. Do not use separate reducing bushings or
adaptors to adapt large hole abrasive wheels.
12. 
13. 
hole wheel, ensure that the thread in the wheel
is long enough to accept the spindle length.
14. Check that the workpiece is properly
supported.
15. Pay attention that the wheel continues to
󰀨
 If working place is extremely hot and humid,
or badly polluted by conductive dust, use a
short-circuit breaker (30 mA) to assure opera-
tor safety.
17. Do not use the tool on any materials contain-
ing asbestos.
18. Cutting discs must not be subjected to any
lateral pressure.
19. Do not use cloth work gloves during operation.

causes tool breakage.
20. Before operation, make sure that there is no
buried object such as electric pipe, water pipe
or gas pipe in the workpiece. 
cause an electric shock, electrical leakage or gas
leak.
21. If a blotter is attached to the wheel, do not
remove it. The diameter of the blotter must be


22. Before installing a grinding wheel, always
check that the blotter part does not have any
abnormalities such as chips or cracks.
23. Tighten the lock nut properly. Overtightening
󰀩

SAVE THESE INSTRUCTIONS.
WARNING: DO NOT let comfort or familiarity
with product (gained from repeated use) replace
strict adherence to safety rules for the subject
product. MISUSE or failure to follow the safety
rules stated in this instruction manual may cause
serious personal injury.
FUNCTIONAL
DESCRIPTION
CAUTION: Always be sure that the tool is
󰀨
checking function on the tool.
Shaft lock
WARNING: Never actuate the shaft lock when
the spindle is moving.
the tool damage.
Press the shaft lock to prevent spindle rotation when
installing or removing accessories.
Fig.1: 1. Shaft lock
Switch action
CAUTION: Before plugging in the tool, always
check to see that the slide switch actuates prop-
erly and returns to the "OFF" position when the
rear end of the slide switch is depressed.
CAUTION: Switch can be locked in the "ON"
position for ease of operator comfort during
extended use. Apply caution when locking tool in

To start the tool, press down the rear end of the slide

For continuous operation, press down the front end of
the slide switch to lock it.
Fig.2: 1. Slide switch
To stop the tool, press down the rear end of the slide

Fig.3: 1. Slide switch
Accidental re-start preventive
function
When plugging in the tool while the switch is ON, the
tool does not start.
󰀨
NOTE: When the accidental re-start preventive func-
tion activates, wait more than one second, and then
start the tool again.
NOTE: When the tool is overloaded and the tool


turning on the tool again.
Soft start feature
Soft start feature reduces starting reaction.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Makita M9503R and is the answer not in the manual?

Makita M9503R Specifications

General IconGeneral
BrandMakita
ModelM9503R
CategoryGrinder
LanguageEnglish

Related product manuals