Makita UR007G User Manual

2 ENGLISH
SPECIFICATIONS
Model: UR006G UR007G
Handle type Bike handle Loop handle
No load speed
(at each rotation speed level)
Cutter blade
Plastic blade (305 mm)
3: 0 - 7,000 min
-1
2: 0 - 5,500 min
-1
1: 0 - 4,600 min
-1
Nylon cutting head
Plastic blade (255 mm)
3: 0 - 5,500 min
-1
2: 0 - 5,000 min
-1
1: 0 - 4,600 min
-1
Overall length
(without cutting tool and battery)
1,815 mm
Nylon cord diameter 2.4 mm
Applicable cutting tool and
cutting diameter
2-tooth blade
(P/N 198345-9)
255 mm
3-tooth blade
(P/N 195299-1)
255 mm
4-tooth blade
(P/N 196895-8)
255 mm
Nylon cutting head
(P/N 197993-1)
430 mm
Plastic blade
(P/N 198383-1)
(P/N 199868-0)
255 mm
305 mm
Rated voltage D.C. 36 V - 40 V max
Net weight 5.7 - 6.3 kg 5.3 - 5.9 kg
Protection degree IPX4
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsmaydi󰀨erfromcountrytocountry.
• Theweightmaydi󰀨erdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge BL4020 / BL4025* / BL4040* / BL4050F*
* : Recommended battery
Charger DC40RA / DC40RB / DC40RC
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
andchargersmaycauseinjuryand/orre.
Recommended cord connected power source
Portable power pack PDC01 / PDC1200
• The cord connected power source(s) listed above may not be available depending on your region of residence.
• Before using the cord connected power source, read instruction and cautionary markings on them.

Makita UR007G Specifications

General

Brand	Makita
Model	UR007G
Category	Trimmer
Language	English