Makita XAU02 User Manual

2 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: XAU02
Overall length (without guide bar) 2,530 - 3,760 mm
(99-1/2″ - 148″)
Rated voltage D.C. 36 V
Net weight 7.8 - 8.4 kg (17.2 - 18.5 lbs)
Standard guide bar length 250 mm
(10″)
Recommended guide bar
length
with 90PX 250 mm
(10″)
with 91PX 250 mm
(10″)
Applicable saw chain type
(refer to the table below)
90PX
91PX
Standard sprocket Number of teeth 6
Pitch 3/8″
Chain speed 0 - 20 m/s
(0 - 1,200 m/min)
(0 - 3,940 ft/min)
Chain oil tank volume 160 cm
3
(5.4  oz)
• Due to our continuing program of research and development, the specications herein are subject to change
without notice.
• Specications may di󰀨er from country to country.
• The weight may di󰀨er depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge BL1820B / BL1830 / BL1830B / BL1840B / BL1850B / BL1860B
Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or re.
Recommended battery adapter
Battery adapter PDC01
• The battery adapter(s) listed above may not be available depending on your region of residence.
• Before using the battery adapter, read instruction and cautionary markings on the battery adapter.

Makita XAU02 Specifications

General

Brand	Makita
Model	XAU02
Category	Pole Saw
Language	English