EasyManuals Logo
Home>Makita>Cutter>XSC04

Makita XSC04 User Manual

Makita XSC04
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background image
10 ENGLISH
To use the hook, simply turn the hook until it snaps into
the open position.
When not in use, always turn the hook until it snaps into
the closed position.
1
2
1. Open position 2. Closed position
Electric brake
This tool is equipped with an electric blade brake. If the
tool consistently fails to quickly stop the circular saw
blade after switch lever release, have tool serviced at a
Makita service center.
CAUTION: The blade brake system is not a
substitute for blade guard. NEVER USE TOOL
WITHOUT A FUNCTIONING BLADE GUARD.
SERIOUS PERSONAL INJURY CAN RESULT.
ASSEMBLY
CAUTION: Always be sure that the tool is
switched off and the battery cartridge is removed
before carrying out any work on the tool.
Hex wrench storage
When not in use, store the hex wrench as shown in the
gure to keep it from being lost.
1
1. Hex wrench
Installing or removing the circular
saw blade
CAUTION: Use only the Makita wrench to
install or remove the circular saw blade.
CAUTION: When installing the circular saw
blade, be sure to tighten the bolt securely.
CAUTION: Be sure the circular saw blade is
installed with teeth pointing up at the front of the
tool.
1
2
3
4
1. Shaft lock 2. Hex wrench 3. Tighten 4. Loosen
To remove the circular saw blade, press the shaft lock
fully so that the circular saw blade cannot revolve and
use the hex wrench to loosen the hex bolt. Then remove
the hex bolt, outer ange and circular saw blade.
1
2
3
4
5
1. Hex bolt 2. Outer ange 3. Circular saw blade
4. Inner ange 5. Cup washer
To install the circular saw blade, follow the removal
procedure in reverse.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Makita XSC04 and is the answer not in the manual?

Makita XSC04 Specifications

General IconGeneral
BrandMakita
ModelXSC04
CategoryCutter
LanguageEnglish

Related product manuals