Man D 2876 LE 301 User Manual

1
2
3
4
Removing and attaching expansion tank
45
D Drain coolant, see page 37
Fig. 1
Remove hollow bolt from bleeder line.
Remove coolant level sensor.
Figs. 2 and 3
Remove the mounting bolts from the brackets of
the expansion tank (13 mm and 19 mm).
Fig. 4
Remove nut (13 mm) from the front side of the ex-
pansion tank.
Take off the expansion tank.
The expansion tank is attached in reverse se-
quence.
3424
3425
3426
3427

Man D 2876 LE 301 Specifications

General

Brand	Man
Model	D 2876 LE 301
Category	Engine
Language	English