Man D2862 LE446 User Manual

General Safety Instructions
MAN marine diesel engines D2868 LE4.. / D2862 LE4..
23
Carefully read through the Operating Instructions before starting any work!
This particularly applies to the General Safety Instructions section
and the safety instructions in the various chapters.
2.11 Signs and notices
The following symbols should be attached in the immediate danger zone.
WARNING
Risk of injury due to illegible symbols
Signs, notices and symbols get dirty over time or become illegible in some other way.
Therefore:
S Make sure that all safety, warning and operating signs and notices are always easily legible.
S Clean or replace illegible safety, warning and operating signs and notices.
Access forbidden
Areas that display this warning must notbe entered.
Electrical voltage
Only qualified electricians are allowed to work in areas that display this sign.
Unauthorised persons are not allowed to enter areas that display this sign.
Hot Surfaces
Hot surfaces, such as hot engines and hot fluids, are not always obvious. Do not touch
them without wearing protective gloves.
Danger to life due to suspended loads
Loads can swing out and fall during lifting, which can cause serious injury or even death.
Risk of injury
Risk of injury if the instructions are not followed.

Man D2862 LE446 Specifications

General

Engine Model	D2862 LE446
Bore	128 mm
Stroke	157 mm
Emissions Standard	EU Stage V
Rated Speed	1800 rpm
Fuel	Diesel
Fuel System	Common Rail
Cooling System	Water-cooled
Displacement	24.24 liters
Aspiration	Turbocharged

Summary

Design and function

Engine construction and engine equipment

Installation and commissioning

Engine installation

Details engine installation steps, interfaces, drawings, and connections.

First commissioning

Outlines critical steps and expertise required for initial engine startup.

Control and operation

Safety instructions

Covers safety rules and ground rules for personnel operating the engine.

Preparation for operation

Starting and stopping the engine

Explains the procedures for safely starting and stopping the engine.

Decommissioning and recommissioning

Recommissioning of shutdown engines

Technical data

Engine data of engines for light duty

Lists detailed technical specifications for various light-duty engine models.