Maintenance and care
22
Lubrication system
Draining of engine oil and changing of
filters
Caution:
Used oil and oil filter cartridges are
dangerous waste.
Observe safety regulations to prevent
damage to the environment.
When engine is at operating temperature,
remove oil drain plug from oil pan and let
old oil drain out completely.
To catch emerging oil, use a container of
sufficient capacity to prevent the oil from
spilling over.
Loosen oil filter cartridge by means of a
tape wrench and remove it. The oil filter
cartridge is filled with oil even if the oil pan
is empty.
Danger:
The oil is hot- risk of scalding.
Do not touch the oil drain plug
with bare fingers. Oil is an envi-
ronmental hazard. Handle it
with care!
Fit new oil filter cartridge, lubricate seal
lightly and tighten cartridge by hand.
Refit drain plugs with new seals.
To Next Page
Loading...
Need help?
General
