Installation and commissioning
MAN marine diesel engines D2868 LE4.. / D2862 LE4..
43
Carefully read through the Operating Instructions before starting any work!
This particularly applies to the General Safety Instructions section
and the safety instructions in the various chapters.
1 Exhaust system
2
Fuel system
3
Auxiliary power take-off
4
Flywheel
5 Sea water inlet
6
Electrical system
7
Lube oil system
The following assembly work must be performed at the interfaces between engine and plant when installing
the engine:
1
Mount exhaust system, see page 52
2
Connect fuel system, see page 50
4
Mount clutch/gearbox, see page 46
5
Connect sea water circuit, see page 49
To Next Page
Loading...
Need help?
General
