Manitou Mara Inline User Manual

6
50 HOUR AIR CAN & PISTON GUIDE
Remove valve cap, thread
shock pump on. Note air
pressure and use pump’s re-
lease valve to release all air
from shock. (Use a 3mm
hex key to gently depress the
valve, ensuring all air is re-
leased.)
1
2
AIR CAN REMOVAL
Clamp upper eyelet of shock in
vise. If Trunnion shock, clamp
on trunnion mounts. (Use soft
jaws to not damage the shock)
With the shock top cap in a
vise use the air can wrench PN
142-37512-K033 to loosen the
air can on the shock. DO NOT
completely remove the air can
at this point, only loosen one
full turn. Removing the air
can completely at this point
will damage the threads due
to pressure in the negative
chamber.
3
Do not proceed to next
step without completely
depressurizing the air spring.
CAUTION

Manitou Mara Inline Specifications

General

Brand	Manitou
Model	Mara Inline
Category	Bicycle Accessories
Language	English