27
MATTOC PRO SERVICE MANUAL
COMPRESSION DAMPER INSTALL
1
2
3
Pour 5wt Maxima fork oil into the
damper leg. Fill it up about ¾ full.
Place a lint-free towel over the opening
in the damper leg and compress the fork
10-15 times.
Pour additional 5wt fork oil into the
damper leg until the oil height (space
from the top of the damper leg to the top
of the oil) is set at the proper level. See
following page for the correct oil height
depending on compression damper type
and fork travel. An oil height setting tool
used for motorcycle forks similar to the
one pictured makes this job easier.
To Next Page
Loading...
Need help?
General