Part Number: 000015431 Rev01 5/19 93
Troubleshooting By Symptom
The troubleshooting procedures follow flow charts.
There are four symptoms, the symptom that you are
experiencing will determine which flow chart to use. The
flow chart asks yes and no questions to determine the
problem. The flow chart will direct you to a procedure to
correct the problem. QuietQube® remote condensing units
use separate charts.
SYMPTOM #1 ICE MACHINE STOPS RUNNING
Ice machine is in Ice Making cycle
or
Has a History of Shutting Down
• Refer to Ice Machine Stops Running Flow Chart
SYMPTOM #2 ICE MACHINE HAS A LONG FREEZE CYCLE
Ice Formation is Thick
or
Thin Ice Fill on inlet or outlet of Evaporator
or
Low Production
E01 Long Freeze (possible)
• Refer to Low Production, Long Freeze Cycle
SYMPTOM #3 WILL NOT HARVEST, CUBES NORMAL
Ice Machine Will Not Harvest - Freeze Cycle is Normal and
Ice Cubes are Not Melted After Harvest
E02 Long Harvest (possible)
Refer to Harvest Problems
SYMPTOM #4 WILL NOT HARVEST CUBES MELTED
Ice Machine Will Not Harvest - Freeze Cycle is Normal and
Ice Cubes are Melted After Harvest
• Refer to Freeze Cycle Normal, Cubes Are Melted
To Next Page
Loading...
Need help?
General