EasyManuals Logo
Home>Manitowoc>Ice Maker>NEO UD0240A

Manitowoc NEO UD0240A Technician's Handbook

Manitowoc NEO UD0240A
140 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
Part Number STH042 7/15 21
Location of Ice Machine
The location selected for the ice machine must meet
the following criteria. If any of these criteria are not met,
select another location.
The location must be indoors.
The location must be free of airborne and other
contaminants.
Air temperature: Must be at least 40°F (4°C) but must
not exceed 110°F (43.4°C).
The location must not be near heat-generating
equipment or in direct sunlight.
The location must be capable of supporting the
weight of the ice machine and a full bin of ice.
The location must allow enough clearance for water,
drain, and electrical connections in the rear of the
ice machine.
The location must not obstruct airflow through or
around the ice machine (condenser airflow is in and
out the front). Refer to the chart below for clearance
requirements.
The ice machine must be protected if it will be
subjected to temperatures below 32°F (0°C). Failure
caused by exposure to freezing temperatures is not
covered by the warranty.
Installation

Table of Contents

Other manuals for Manitowoc NEO UD0240A

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Manitowoc NEO UD0240A and is the answer not in the manual?

Manitowoc NEO UD0240A Specifications

General IconGeneral
BrandManitowoc
ModelNEO UD0240A
CategoryIce Maker
LanguageEnglish

Related product manuals