Part Number 040002909 11/13 13
Section 3
Operation
Touch Pad Features
The touch pad offers a series of pressure sensitive
buttons to control ice machine operation and provide
operational status.
ON/OFF
The On/Off Button is used to start and stop ice making.
The blue light indicates whether the ice machine is in Ice
Making (light on) or Off (light off).
NOTE: If ice is on the evaporator (during the freeze or
harvest cycle) and the On/Off button is pressed; the next
cycle will have a thick slab of ice. Press the On/Off
button and allow the ice to melt off the evaporator, then
start a new freeze cycle.
DELAY
Pressing the Delay button will start a delay period. The
ice machine will finish the freeze and harvest cycle and
then start the delay period.
• Pressing the button once will start a 4 hour delay
period.
• Pressing the button twice will start a 12 hour delay
period.
• Pressing the button three times will start a 24 hour
delay period.
• Pressing the button four times will cancel the delay
periods.
NOTE: The delay period will be canceled if power is
interrupted to the ice machine. When power is restored,
the ice machine will start an ice making cycle.
CLEAN
Pressing the Clean button for 3 seconds will start a clean
cycle. After the clean cycle is complete, the ice machine
will automatically start an ice making cycle.
• Pressing the Clean button again within 45 seconds of
the clean cycle starting will abort the clean cycle.
• Pressing the On/Off button anytime during the Clean
cycle will de-energize the On/Off LED and the ice
machine will stop after the Clean cycle is complete.
• Pressing the Clean button will pause the Clean cycle.
The On/Off and Clean lights will flash on/off to
indicate pause mode. Pressing the Clean button
again will continue the Clean cycle from the point of
interruption.
NOTE: Opening the ice damper in the clean cycle for 2
seconds will pause the clean cycle. Opening the ice
damper for 30 seconds will cancel the clean cycle.
BIN FULL
The Bin Full light energizes when the bin is full or is de-
energized if the bin is not full.
SERVICE
The service light indicates the machine needs attention.
• Refer to Section 5 for more information if this light is
energized.
On/Off - Blue = Machine On
Off = Machine Is Off
Delay - Blue = Delay Mode On
Off = Delay Mode Is Off
Clean - Yellow = Clean Cycle On
Off = Cleaning is Off
Bin Full - Blue = Bin Is Full
Off = Bin Is Not Full
Service - Red = Needs Service
Off = Doesn’t Need Service
To Next Page
Loading...
Need help?
General