Part Number 80-01111-9 7/10 75
SPRAY BAR DISASSEMBLY
The spray bar supplies water to the individual ice
making cups. Water from the water pump sprays
through the nozzles, located on the upper portion of
the tubes.
1. Grasp one end of the spray bar, lift up and remove
from seat formed in evaporator bucket.
2. Remove clamp on water inlet tubing by grasping
both ears on clip and separating.
3. Apply food grade lubricant to ease re-assembly of
spray bar components when necessary.
4. To re-install spray bar, position water inlet tubing
on inlet ports, and squeeze clips until tight.
5. Reposition assembly on water trough seat.
Nozzles and inserts can be removed for cleaning
by unscrewing nozzles. Inserts are located inside
the spray bar ports. The spray bar also
disassembles for easy cleaning.
To Next Page
Loading...
Need help?
General