IOM-Ownerās Manual - VFH-B 18/24 Series
8
CHECK AFTER INSTALLATION INSTALLER
Check Items
Is the unit firmly mounted?
Has the gas leakage been checked?
Is the thermal insulation of the unit
sufficient?
Is the drainage smooth?
Does the power supply voltage match
the rated voltage specified on the
nameplate?
Are the lines and pipelines correctly
installed?
Are the models of lines in conformity
with requirements?
Are there any obstacles near the air
inlet and outlet of the indoor and out-
door units?
Have the length of refrigerating pipe
and refrigerant charge amount been
recorded?
Has the unit been safely grounded?
Problems Owing to Improper Installation
The unit may drop, vibrate or make noises
May cause unsatisfactory cooling (heating)
effect or damage to compressor
May cause condensation and water dripping
May cause condensation and water dripping
The unit may break down or the components
may burn out
The unit may break down or the components
may burn out
The unit may break down or the components
may burn out
The unit may break down or the components
may burn out
This is a critically charged product
and excess refrigerant is determined
by refrigerant line length.
Risk of electrical leakage