Remote Control Manual - PS-81B / PS-101B
2
2
9
(Timer Stop Operation)
The TIMER OFF feature is useful
when you want the unit to turn off
automatically. The air conditioner
will stop automatically at the set time.
To stop the air conditioner in 6 hours.
1. Press the TIMER button until the
TIMER OFF indicator is displayed
and the setting time beside is flashing.
2. Use the TEMP/TIME button to display
"6.0" beside the TIMER OFF display.
3. This function will be activated after 3
seconds you release the TEMP/TIME
button.
TIMER OFF
Example:
(Timer Start Operation)
The TIMER ON feature is useful when
you want the unit to turn on automatically.
The air conditioner will automatically
start operating at the set time.
IMPORTANT: The time will be registered
within a 3 second period(after pressing
the TEMP/TIME button), so you should
continue pressing the button until the
desired time is established. Otherwise
you must repeat the steps again.
To start the air conditioner in 8 hours.
1. Press the TIMER button, the TIMER
ON indicator is displayed and the
setting time beside is flashing.
2. Use the TEMP/TIME button to display
"8.0" beside the TIMER ON display
of the remote control.
3. Wait for 3 seconds and the setting time
stops flashing and this function is
activated.
TIMER ON
Example:
Example of timer setting
ON
OFF
Features of remote control(continued)
RESET Button: When you press the recessed RESET button,
all current settings are cancelled and the control will return to
the initial settings.
7
FAN Button: Used to select the Fan Speed in four steps-
AUTO、LOW 、MED(some models without) or HIGH. Each
time the button is pressed, the fan speed mode is shifted.
6
8
temperature setting or to adjust the TIMER in a counter-clockwise
direction.
NOTE: Press and hold and buttons together for 3 seconds
will alternate the temperature display between the C & F scale.
TIMER Button: This button is used to preset the time ON
(start to operate) and the time OFF (turn off the operation).
10
LOCK Button: When you press the LOCK button, all current
settings are locked in and the remote controller does not accept
any operation except that of the LOCK. Press again to cancel
the LOCK mode.
9
11
CANCEL Button:
(a). If the TIMER ON, TIMER ON OFF or TIMER OFF ON
feature has been set, pressing the CANCEL button will override
the TIMER program and turn off the unit as well.
(b). If only setting TIMER OFF feature, pressing the CANCEL
will cancel the timer off setting and turn on the unit (when
the unit is off).
(c). If no TIMER feature has been set, press the CANCEL button,
and nothing will happen.
CLOCK Button: Use to set the time.
LED Button: Press this button to clear the digit display in the
air conditioner, press it again to activate it .
12
Start
Off
8 hours later
Set
Stop
On
Set 6 hours later
SLEEP Button: In SLEEP mode,
5
Active/Disable sleep function. This will maintain the most
comfortable temperature and save energy. This function is
available on COOL, HEAT or AUTO mode only. For detail,
see Sleep operation in USER S MANUAL.
,
,,
NOTE:
be cancelled if MODE, FAN SPEED or ON/OFF button is
pressed.
While the unit is running under SLEEP mode, it would
,,,,
,,
To Next Page
Loading...
Need help?
General
