Marshall Amplification MID Bluetooth User Manual

B. CHARGING
THE RED BATTERY INDICATOR STARTS BLINKING WHEN THE BATTERY LEVEL IS LOW.
1. PLUG THE INCLUDED USB CABLE INTO THE MICRO USB SOCKET ON THE HEADPHONE.
2. PLUG THE OTHER END OF THE CABLE INTO A USB POWER SOURCE. THE RED BATTERY INDICTATOR STAYS LIT WHEN CHARGING.
3. WHEN THE BATTERY IS FULLY CHARGED, THE BATTERY INDICATOR TURNS WHITE.
NOTE: CHARGE THE BATTERY BEFORE USING THE HEADPHONES THE FIRST TIME.
2 HOURS CHARGE GIVES APPROXIMATELY 8 HOURS OF PLAYBACK AT MEDIUM VOLUME.
1
3
2
A. POWER ON/OFF D. BLUETOOTH
®
PAIRING
=
=
1. WHEN POWERED ON, DOUBLE CLICK THE POWER BUTTON ON THE HEADPHONES.
2. THE BLUETOOTH PAIRING INDICATOR STARTS FLASHING BLUE. ENABLE BLUETOOTH ON YOUR
DEVICE. SELECT “MID” IN THE BLUETOOTH LIST AND ACCEPT PAIRING.
3. THE INDICATOR TURNS OFF WHEN THE PAIRING IS COMPLETED.
NOTE: AFTER THE INITIAL PAIRING, THE HEADPHONES WILL AUTOMATICALLY CONNECT TO THE DEVICE
WHEN TURNED ON AGAIN.
1. PUSH AND HOLD THE POWER BUTTON FOR 4
SECONDS TO TURN ON.
2. PUSH AND HOLD THE POWER BUTTON FOR 4
SECONDS TO TURN OFF.
NOTE: IF NOT CONNECTED TO A SOUND SOURCE
THE HEADPHONES WILL AUTOMATICALLY TURN
OFF AFTER 10 MINUTES.
1
2
00:04
00:04
MID
=
1
3
ENGLISH
=
2
004
h_Marshall-Mid-user-guide-160921.indd 4 2016-09-21 10:22

Marshall Amplification MID Bluetooth Specifications

General

Brand	Marshall Amplification
Model	MID Bluetooth
Category	Headphone
Language	English